flyingfoam

General Nerf => Moddifications => Topic started by: Duck_slayer on November 21, 2006, 11:25:14 pm



Title: Dart Tag Gun Moddification (old style)
Post by: Duck_slayer on November 21, 2006, 11:25:14 pm
Okay first off this mod is not as good as carrtoons mod ,but it is my first mod so bare with me. 

Tools:
Phillips screwdriver
Hot glue gun and lots of glue sticks
10 marker barrels
Patience

First take apart your gun make sure you know where every piece goes...Just incase. Next take out the whole turret buttembly. Unscrew the orange piece where the darts go I don't care whatyou do with it throw it away if you want. Then take the barrels and glue the small end in the holes in little white turret where where orange thing was attached to.Let it dry and and put it back in.

You see the little white thing at the top where the pin cocks the gun. Take three rubber bands and hot glue them to about halfway up the straight end (make sure to strech them before putting them on). Now you see the top screw (boss?) that sticks out put the rubber bands on it .And screw it back together try to cock it if it dosen't cock take it back apart and remove one rubber band.You're done now.ENJOY

Sorry about no pics no digital camera at the time.

I got flamed on Nerf On about not haveing any pics or paint but I truely don't have a digital camera ain't gots one


Title: Re: Dart Tag Gun Moddification (old style)
Post by: General Cole on November 22, 2006, 07:06:59 pm
You really need to get pics, you confused me, and that is one of my primaries.


Title: Re: Dart Tag Gun Moddification (old style)
Post by: Duck_slayer on November 26, 2006, 06:00:51 pm
where'd you get lost I might can help.


Title: Re: Dart Tag Gun Moddification (old style)
Post by: General Cole on November 27, 2006, 07:30:55 pm
Where the bands go, and where to glue the barrels.


Title: Re: Dart Tag Gun Moddification (old style)
Post by: Duck_slayer on November 27, 2006, 08:46:42 pm
Okay If you take the orange turret off you'll see the white on it screwed on to K now stick the small end of the crayloa barrels into the hole in the white turret. now for the bands you see the little white piece that the cocking pin goes on put the bands on the back of that and on the verry front top screw boss. there you have it.

That is as good as I can explain it


Title: Re: Dart Tag Gun Moddification (old style)
Post by: General Cole on November 28, 2006, 05:04:20 pm
Pics?


Title: Re: Dart Tag Gun Moddification (old style)
Post by: Duck_slayer on November 28, 2006, 05:53:25 pm
NO digital camera i sry


Title: Re: Dart Tag Gun Moddification (old style)
Post by: General Cole on November 30, 2006, 09:14:33 pm
Please from no on, get pics, I don't care if you have to get a pic from the Haven and edit it.


Title: Re: Dart Tag Gun Moddification (old style)
Post by: Megamannt92 on November 30, 2006, 11:02:09 pm
I thought you got a new digi camera? Get a cheap one, it will help your mods out alot!


Title: Re: Dart Tag Gun Moddification (old style)
Post by: Duck_slayer on December 01, 2006, 12:29:58 pm
No I said I had a new comp


Title: Re: Dart Tag Gun Moddification (old style)
Post by: General Cole on December 06, 2006, 12:44:33 am
NO digital camera i sry- That was from you

Please no more mods until you can get pics up please!